Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
358
AP4700>admin(network.wireless.wlan)>show
Displays the access point’s current WLAN configuration.
Syntax
Example
admin(network.wireless.wlan)>show summary
WLAN1
WLAN Name : Lobby
ESSID : 101
Radio Band(s) : 2.4 and 5.0 GHz
VLAN : <none>
Security Policy : Default
QoS Policy : Default
Rate Limiting : disabled
admin(network.wireless.wlan)>show wlan 1
ESS Identifier : 101
WLAN Name : Lobby
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : available
Hotspot : not available
Maximum MUs : 127
MU Idle Timeout : 30
Security Policy : Default
MU Access Control : Default
Kerberos User Name :
Kerberos Password : ********
disallow mu to mu : disable
Use Secure Beacon : disable
answer Broadcast ess : enable
QoS Policy : Default
per-mu rate limiting : disabled
per-mu rate limit (wired-to-wl) : 1000 kb
per-mu rate limit (wl-to-wired) : 1000 kb
For information on displaying WLAN infromation using the applet (GUI), see “Enabling Wireless LANs
(WLANs)” on page 146.
show summary Displays the current configuration for existing WLANs.
wlan <number> Displays the configuration for the requested WLAN (WLAN 1 through 16).