Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
354
Network Wireless Commands
AP4700>admin(network.wireless)
Displays the access point wireless submenu. The items available under this command include:
set Sets the access point’s wireless (proxy arp) configuration.
show Displays the access point’s wireless (proxy arp) configuration.
wlan Displays the WLAN submenu used to create and configure up to 16 WLANs per access point.
security Displays the security submenu used to create encryption and authentication based security
policies for use with access point WLANs.
acl Displays to the Access Control List (ACL) submenu to restrict or allow MU access to access
point WLANs.
radio Displays the radio configuration submenu used to specify how the 802.11a/n or 802.11b/g radio
is used with specific WLANs.
qos Displays the Quality of Service (QoS) submenu to prioritize specific kinds of data traffic within a
WLAN.
rate-limiting Displays the Rate Limiting submenu.
rogue-ap Displays the Rogue-AP submenu to configure devices located by the access point as friendly or
threatening for interoperablity.
wips Goes to the Wireless Intrusion Protection System (WIPS) submenu.
mu-locationing Displays the MU locationing submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.