Specifications

CLI Reference
Altitude 4700 Series Access Point Product Reference Guide
328
AP4700>admin(network.wan)>show
Displays the access point WAN port parameters.
Syntax
Example
admin(network.wan)>show
Status : enable
WAN DHCP Client Mode : disable
IP Address : 10.1.1.1
Network Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Primary DNS Server : 0.0.0.0
Secondary DNS Server : 0.0.0.0
Auto-negotiation : disable
Speed : 100M
Duplex : full
WAN IP 2 : disable
WAN IP 3 : disable
WAN IP 4 : disable
WAN IP 5 : disable
WAN IP 6 : disable
WAN IP 7 : disable
WAN IP 8 : disable
PPPoE Mode : enable
PPPoE User Name : JohnDoe
PPPoE Password : *******
PPPoE keepalive mode : enable
PPPoE Idle Time : 600
PPPoE Authentication Type : chap
PPPoE State
admin(network.wan)>
For an overview of the WAN configuration options available using the applet (GUI), see
“Configuring WAN Settings” on page 135.
show Shows the general IP parameters for the WAN port along with settings for the WAN interface.