Specifications

Altitude 4700 Series Access Point Product Reference Guide
309
AP4700>admin(network.lan.wlan-mapping)>show
Displays the VLAN list currently defined for the access point. These parameters are defined with the set
command.
Syntax
Example
admin(network.lan.wlan-mapping)>show name
-----------------------------------------------------------------------------
Index VLAN ID VLAN Name
-----------------------------------------------------------------------------
1 1 VLAN_1
2 2 VLAN_2
3 3 VLAN_3
4 4 VLAN_4
admin(network.lan.wlan-mapping)>show vlan-cfg
-----------------------------------------------------------------------------
LAN No. Management VLAN Tag Native VLAN Tag
-----------------------------------------------------------------------------
111
211
WLAN :WLAN1
mapped to VLAN :<none>
VLAN Mode :static
admin(network.lan.wlan-mapping)>show lan-wlan
WLANs on LAN1:
:WLAN1
:WLAN2
:WLAN3
WLANs on LAN2:
admin(network.lan.wlan-mapping)>show wlan
WLAN1:
WLAN Name :WLAN1
ESSID :101
Radio Bands :2.4 and 5.0 GHz
VLAN :
Security Policy :Default
QoS Policy :Default
Rate Limiting :disabled
For information on displaying the VLAN screens using the applet (GUI), see “Configuring VLAN
Support” on page 126.
show name Displays the existing list of VLAN names.
vlan-cfg Shows WLAN-VLAN mapping and VLAN configuration.
lan-wlan Displays a WLAN-LAN mapping summary.
wlan Displays the WLAN summary list.