Specifications

Monitoring Statistics
Altitude 4700 Series Access Point Product Reference Guide
264
To view access point WAN Statistics:
1 Select Status and Statistics > WAN Stats from the access point menu tree.
2 Refer to the Information field to reference the following access point WAN data:
3 Refer to the Received field to reference data received over the access point WAN port.
Status The Status field displays Enabled if the WAN interface is
enabled on the WAN screen. If the WAN interface is
disabled on the WAN screen, the WAN Stats screen
displays no connection information and statistics.
HW Address The Media Access Control (MAC) address of the access
point WAN port. The WAN port MAC address is hard
coded at the factory and cannot be changed.
IP Addresses The displayed Internet Protocol (IP) addresses for the
access point WAN port.
Mask The Mask field displays the subnet mask number for the
access point’s WAN connection. This value is set on the
WAN screen.
Link The Link parameter displays Up if the WAN connection is
active between the access point and network, and Down if
the WAN connection is interrupted or lost. Use this
information to assess the current connection status of the
WAN port.
Speed The WAN connection speed is displayed in Megabits per
second (Mbps), for example, 54Mbps. If the throughput
speed is not achieved, examine the number of transmit
and receive errors, or consider increasing the supported
data rate.