Specifications

Altitude 4700 Series Access Point Product Reference Guide
147
To configure WLANs on the access point:
1 Select Network Configuration > Wireless from the access point menu tree.
If a WLAN is defined, that WLAN displays within the Wireless Configuration screen. When the
access point is first booted, WLAN1 exists as a default WLAN available immediately for connection.
2 Refer to the information within the Wireless Configuration screen to view the name, ESSID, access
point radio designation, VLAN ID and security policy of existing WLANs.
WLAN Name The Name field displays the name of each WLAN that has
been defined. The WLAN names can be modified within
individual WLAN configuration screens. See “Creating/
Editing Individual WLANs” on page 148 to change the
name of a WLAN.
ESSID Displays the Extended Services Set Identification (ESSID)
associated with each WLAN. The ESSID can be modified
within individual WLAN configuration screens. See
“Creating/Editing Individual WLANs” on page 148 to
change the ESSID of a specific WLAN.
Radio The Radio field displays the name of the access point
radio the WLAN is mapped to (either the 802.11a/n radio
or the 802.11b/g/n radio). To change the radio designation
for a specific WLAN, see “Creating/Editing Individual
WLANs” on page 148.
VLAN The VLAN field displays the specific VLAN the target
WLAN is mapped to. For information on VLAN
configuration for the WLAN, see “Configuring VLAN
Support” on page 126.