Specifications

Altitude 4700 Series Access Point Product Reference Guide
123
CHAPTER
5
Network Management
Refer to the following for network management configuration activities supported by the Access Point
user interface:
● Configuring the LAN Interface on page 123
● Configuring WAN Settings on page 135
● Enabling Wireless LANs (WLANs) on page 146
● Configuring Router Settings on page 186
● Configuring IP Filtering on page 188
Configuring the LAN Interface
The access point has one physical LAN port supporting two unique LAN interfaces. The access point
LAN port has its own MAC address. The LAN port MAC address is always the value of the access
point WAN port MAC address plus 1. The LAN and WAN port MAC addresses can be located within
the LAN and WAN Stats screens.
For information on locating the Access Point’s MAC addresses, see “Viewing WAN Statistics” on
page 263 and “Viewing LAN Statistics” on page 266.
Use the LAN Configuration screen to enable one (or both) of the Access Point’s LAN interfaces, assign
them names, define which LAN is currently active on the Access Point Ethernet port and assign a
timeout value to disable the LAN connection if no data traffic is detected within a defined interval.