Installation guide

Radio Characteristics

Altitude™ 4532 Series Access Point Installation Guide

Radio Characteristics

The Altitude 4532 Access Point model Access Points have the following radio

characteristics:

Operating

Channels

All channels from 4920 MHz to 5825 MHz except channel

52 -64

Channels 1-13 (2412-2472 MHz)

Channel 14 (2484 MHz) Japan only

Actual operating frequencies depend on regulatory

approval for the country of use.

Data Rates

Supported

802.11b: 1,2,5.5,11Mbps

802.11g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps

802.11a: 6,9,12,18,24,36,48, and 54Mbps

802.11n: MCS 0-15 up to 300Mbps

Wireless Medium Direct Sequence Spread Spectrum (DSSS),

Orthogonal Frequency Division Multiplexing (OFDM)

Spatial multiplexing (MIMO)

Network Standards 802.11a, 802.11b, 802.11g, 802.3, 802.11n (Draft 2.0)

Maximum Available

Transmit Power

Maximum available conducted transmit power per chain:

2.4 GHz: 21dBm

Maximum available conducted transmit power all chains:

2.4 GHz: 24dBm

Maximum available conducted transmit power per chain:

5 GHz: 19dBm

Maximum available conducted transmit power all chains:

5 GHz: 22dBm

Transmit Power

Adjustment

1dB increments

Antenna

Configuration

2x3 MIMO (transmit on two and receive on all three

antennas)