Installation guide

LED Indicators
Altitude™ 4532 Series Access Point Installation Guide
21
LED Indicators
Both Integrated Antenna and External Antenna models have LED activity indicators on the
front of the case. With the External Antenna models mounted above a ceiling, LEDs are at
the center of an oval badge on the ceiling; a light pipe enables viewing the back LEDs
through the ceiling tile.
The LEDs provide a status display indicating error conditions, transmission, and network
activity for the 5 GHz 802.11a/n (amber) radio or the 2.4 GHz 802.11b/g/n (green) radio.
Task 5 GHz Activity LED (Amber) 2.4 GHz Activity LED (Green)
System Booting Solid On (During start up only) Solid On (During start up only)
Radio Shutdown
Administratively
or
LEDs Disabled
Off Off
Radio Not
Configured
or
Country-code not
set
or
WLAN not mapped
to radio
Blink (On 2 seconds, Off 2 seconds) Blink (On 2 seconds, Off 2 seconds)
Locate AP Mode Off Blinking