Installation guide

External Antenna Model Wall Mount Instructions
Altitude™ 4532 Series Access Point Installation Guide
16
External Antenna Model Wall Mount
Instructions
Wall mounting requires hanging the Altitude 4532 Access Point along its width or length
using the pair of slots on the bottom of the unit. The Altitude 4532 Access Point can be
mounted onto any plaster, wood, or cement wall surface using the provided wall anchors.
Wall Mount Hardware
● Two wide-shoulder Phillips pan head self-tapping screws
● Two wall anchors
● Safety wire (recommended) and security cable (optional)
NOTE
In the event that the original mounting screws are lost, the following screws can be used:
(ANSI Standard) #6-18 X 0.875in. Type A or AB Self-Tapping Screw, or (ANSI Standard Metric) M3.5
X 0.6 X 20mm Type D Self-Tapping Screw.