Specifications

9
Extreme Networks Evaluation Guide: Altitude 4511 Access Point
© 2011 Extreme Networks, Inc. All rights reserved.
Configuration
Use the device Overrides configuration to configure a standalone AP. Profiles can be used, but the easier path is to
directly configure the device.
RF Domain Overrides
webUI navigation: Configuration -> Devices -> Device Configuration ->
RF Domain Overrides
Select Time Zone and Country
Click OK
Profile Overrides
webUI navigation: Configuration -> Devices -> Device Configuration ->
Profile Overrides
Virtual Interface with IP
Click Interfaces -> Virtual Interfaces
Click Add, leave the VLAN 1 name
Uncheck “Use DHCP to Obtain IP”
Assign an IP address, 192.168.100.1/24
Click OK, then Exit
Radio and WLAN
Click Interfaces -> Radios
Select Radio1, click Edit
Under Radio Settings
Select an operating Channel. Do not select “Smart”
Enter a Transmit power e.g. “24”. Do not select “Smart”
Click OK
Select the WLAN Mapping screen
Click Create a New WLAN
Enter a friendly name in the top box, Enter an SSID
Click create next to the WLANQoS box. Enter a friendly name
Click OK, then Exit
Click OK, then Exit
Select your WLAN from the right side pane, click the << arrow
Click OK, then Exit
Default Gateway
Click Network -> Static Routes
Click Add Row
Enter 0.0.0.0/0 as the network address
Enter 192.168.100.254 as the gateway
Click OK
Commit and Save
Click the Commit button, then Save in the upper right corner