Specifications

Extreme Networks Evaluation Guide: Altitude 4511 Access Point

Use Case One

This case will show the conﬁguration required for a

Standalone AP using the device Overrides conﬁguration.

This is the most direct method to conﬁgure a standalone

AP and is ideal for conducting a site survey.

Extreme Networks equipment required:

One (1) Altitude 4511

Third-party equipment required:

Two PCs; one upstream and one downstream. Set the

PCs with a static IP address to be on the same subnet.

Alternatively, connect the Altitude 4511 to a subscriber

gateway and test using an Internet connection.

Test Setup

Conﬁgure the network and test PCs as shown in

the diagram.

Diagnostics

• Verify the test PCs have the correct IP addresses

• Verify the AP actually has a WLAN associated. Use

the information in the Diagnostics section to view

the WLANs and wireless clients on each AP

5644-01

Downstream Test PC

192.168.100.3/24

Layer 2 Network Switch

Gateway and Router DHCP Server

192.168.100.254/24

Controller Conﬁguration

Password: helpme

Access Method: Telnet, SSH, HTTP

192.168.100.1/24

Upstream Test PC

192.168.100.2/24

Altitude 4511

Standalone Access Point