Specifications

Extreme Networks Evaluation Guide: Altitude 4511 Access Point

Appendix

LED Behavior

The Altitude 4511 has two LEDs to display device status.

The green LED is used to indicate 2.4Ghz operation and

the Amber LED is used to indicate 5Ghz operation.

You will note that the opposite LED will be used to

indicate other states. For example, if operating in 2.4Ghz

bands, the Green LED will indicate activity while the

Amber LED will indicate state.

The following acronyms are used in the table:

CAP = controller AP

DAP = dependent AP

Standalone = individual AP managed by itself

State Description

1 AP is booting up

2 DAP that is not adopted; or does not have a proﬁle

3 DAP that is adopted and functioning

4 DAP that WAS adopted, but the Controller has died. AP retains previous conﬁg

5 CAP (controller AP) or Standalone AP that is functioning

6 CAP or Standalone that is not conﬁgured

State Green LED Amber LED

1 Solid Solid

2 Solid Solid

3 Blink with activity if 2.4Ghz; else o Blink with activity if 5Ghz; else o

4 Blink with activity if 2.4Ghz; else on Solid Blink with activity if 5Ghz; else on Solid

5 Blink with activity if 2.4Ghz; else on Solid Blink with activity if 2.4Ghz; else on Solid

6 Solid Solid