Specifications

16
Extreme Networks Evaluation Guide: Altitude 4511 Access Point
© 2011 Extreme Networks, Inc. All rights reserved.
Configuration
Create Adoption Policy
webUI navigation: Configuration -> Device -> Adoption Policy
Click add
Enter a name
Click Continue
Click add
Select Match Type, any
Select Profile Name “dependent-AP4511”
Click OK, then Exit
Create an Open WLAN
webUI navigation: Configuration -> Wireless -> Wireless LAN
Click add
Assign a friendly name for the WLAN
Enter an SSID e.g. Guest-Open
Enter 200 in the VLAN pool box
Click OK, then Exit
Create a Secure WLAN
webUI navigation: Configuration -> Wireless -> Wireless LAN
Click add
Assign a friendly name for the WLAN
Enter an SSID e.g. Guest-Secure
Enter 300 in the VLAN pool box
Click OK
Click Security, click WPA2-CCMP in the “Select Encryption” option
Clear the Pre-Shared Key field, click the show box
Enter an ASCII string between 8 and 63 characters e.g. extremenetworks
Click OK
Click Client Settings, uncheck Client-to-client Communication
Click OK, then Exit
Create SmartRF Policy
webUI navigation: Configuration -> Wireless -> SmartRF (or edit the default SmartRF policy to match
your settings)
Click add
Assign a name
Leave sensitivity at Medium
Check the option to Enable SmartRF policy
Click OK, then Exit