Installation guide

Using the Initial Setup Wizard
Altitude™ 4511 Access Point Installation Guide
39
21 Refer to the Country and Time Zone field to set the following device deployment
information:
● Location - Define the location of the Access Point. The Location parameter acts as a
reminder of where the AP can be located within the Extreme Networks managed
wireless network.
● Contact - Specify the contact information for the administrator. The credentials
provided should accurately reflect the individual responding to service queries.
● Country - Select the Country where the Access Point is deployed. The Access Point
prompts for the correct country code on the first login. A warning message also
displays stating an incorrect country setting may result in illegal radio operation.
Selecting the correct country is central to legal operation. Each country has its own
regulatory restrictions concerning electromagnetic emissions and the maximum RF
signal strength that can be transmitted. This is a required parameter.
● Time Zone - Set the time zone where the Access Point is deployed. This is a required
parameter. The setting should be complimentary with the selected deployment
country.
22 If an NTP resource is unavailable, set the System Date and Time (calendar date, time and
AM/PM designation).
23 Optionally enter the IP address of a server used to provide system time to the Access
Point. Once the IP address is entered, the Network Time Protocol (NTP) functionality is
engaged automatically for synchronization with the NTP resource.
24 Select Next. The Initial AP Setup Wizard displays the Summary and Commit screen to
summarize the screens (pages) and settings updated using the Initial AP Setup Wizard.