Installation guide

Wall Mount Installation
Altitude™ 4511 Access Point Installation Guide
11
NOTE
Extreme Networks recommends the following customer supplied mounting accessories for an
Altitude 4511 Access Point wall mount installation:
2, screws, #6 x 2.00 inch pan head
2, wall anchors suitable for the #6 screws
To install an Altitude 4511 Access Point to a wall surface:
1 Attach the metal mounting plate (shipped with the Altitude 4511 Access Point) to a wall
surface at the desired deployment location.
The screws used to mount the bracket are customer provided and should be #6, with a
2.00 inch length.