Specifications

Summit WM series switch WM200/2000 Hardware maintenance
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
72
5 Observe the following ESD prevention guidelines during the performance of system maintenance
procedures:
● Handle cards by their edges only
WARNING!
WARNING: Avoid contact between the card and your clothing. Electrostatic charges on clothing can damage the
card. The wrist strap protects the card from electrostatic charges on your body only.
● Immediately place any card you remove from the system into a static-shielding package.
WARNING!
DANGER: The card must remain in a static-shielding bag or static-free box until the card is returned to the
warehouse.
● Do not remove a replacement card from its static-shielding packaging until you are ready to
install it.
NOTE
This procedure applies to upgraded systems.
● Remove cards by pressing/pulling the cPCI card ears
NOTE
Cards are locked from manufacturing with a screw at each end. In order to remove a card, the holding screws
must be removed.
Turning off the redundant AC-Powered, Summit WM series switch
WM200/2000
To turn off redundant AC-powered Summit WM series switch WM200/2000, a shutdown/halt is
recommended to ensure that system's processing operations are properly terminated prior to the power
interruption.
Figure 16: Summit WM series switch WM200/2000 power switches