Specifications

Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
59
5 Summit WM series switch WM200/2000
Diagnostics
WARNING!
Changes or modifications made to the Summit WM series switch or the Altitude APs which are not expressly
approved by Extreme Networks could void the user's authority to operate the equipment.
Only authorized Extreme Networks service personnel are permitted to service the system. Procedures that should be
performed only by Extreme Networks personnel are clearly identified in this guide.
WM200/2000 Filesystem Constraints
The WM200/2000 System has the following constraints:
● 1GB Disk Space available
● Reduced number of partitions to 4
● Separate Partitions for logging and application storage (Backup Images, Image Storage for Summit
WM series switch and Altitude AP.
Table 5 shows the filesystem constraints for the Summit WM series switch.
NOTE
A separate rescue partition is also installed providing a method of rescue installation.
WM200/2000 System Capacity
The Summit WM series switch WM200/2000 has two models. The Campus model and Enterprise model
consist of the same hardware, and have their system capacity limited based on the applied license key.
A special license key is available to upgrade from Campus to Enterprise capacity.
Table 5: WM200/2000 Filesystem Constraints
Filesystem Size Comment
/ 600MB Main partition – Installs OS, User accounts, application
components, system logs
/var/controller/images 200MB Storage area for system related images – Application RPM,
OSUpdate packages, AP images
/var/controller/log 128MB Stores application related logs
/var/controller/cdr 32MB Stores user CDRs
/tmp 128MB Memory mapped filesystem for quick IO operations off Flash