Specifications

FILTER_MGR_ID (67)
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
149
FILTER_MGR_ID (67)
83 Client session de-registration
succeeded (%s) Reason is: User
changing subnet.
Policy request to user de-
registration.
None
Table 35: FILTER_MGR_ID (67) logs and events
Log
ID
Log Message Comment Action
Critical
1 Connection to messaging bus
failed - reason [%d]. Filter
Manager shutdown!!!
Internal operation error.
Connection will be re-attempted.
If problem persists Contact
Technical Support for
investigation.
Major
9 Unknown filter ID [%d] to be
sent to FE.
Possible configuration issue.
Unknown configuration element
may cause operational issues.
If problem persists Contact
Technical Support for
investigation.
10 Number of rules per filter ID
[%d] exceeds the limit.
Limits enforcement. Possible
that some of the intended filter
rules for a definition have not
been persisted.
Revisit rule definition to
determine effectiveness of
existing definitions and identify
set of rules to possible delete to
create additional space
11 Total number of rules exceeds
the limit [%d].
Limits enforcement. Possible
that some of the intended filter
rules for a definition have not
been persisted.
Revisit rule definition to
determine effectiveness of
existing definitions and identify
set of rules to possible delete to
create additional space
12 No rules defined for this filter
ID [%d].
Internal Error Condition. Filers
are defined by default with at
least 1 rule (Deny All). This
condition should never occur.
If problem persists Contact
Technical Support for
investigation.
13 Filter rules response returned
NACK. Error code [%d].
Internal operation failure. Failed
to obtain a set of filter rules
from the systems provisioning
system. Component will retry.
If problem persists Contact
Technical Support for
investigation.
14 FE is not responding - error
[%d].
Failed to communicate with FE
during provisioning or stats
collection information. Filtering
system will reset.
If problem persists Contact
Technical Support for
investigation.
15 Configuring wrong filter ID [%d]. Internal operation error in
processing a Filter group.
Possible misconfiguration
problem. Filtering sub-system
will retry.
If problem persists Contact
Technical Support for
investigation.
16 Property array is NULL for the
received message [%d].
Internal operation failure.Flter
sub-system will retry.
If problem persists Contact
Technical Support for
investigation.
Table 34: MU_SESMGR_ID (66) logs and events (Continued)
Log
ID
Log Message Comment Action