Specifications

Logs and Events
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
142
In
run_analysis_against_specific_lis
t: cleanup_memory_for_data for
FRIENDLY_AP failed.
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
AP information. Memory leak
may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
3rd party information. Memory
leak may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
friendly AP party information.
Memory leak may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
RF Data Collector connection
information. Memory leak may
occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
Scan group information. Memory
leak may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Cannot change scan parameters
or list of APs when scan is in
progress. Scan update failed.
Operational error. Operator can't
change parameters for a running
scan. Scan must first be
stopped and then modified.
None
Unable to determine time when
scan results received from
RFDC. Cannot process results
and will have to drop them.
Internal operational issue. May
result in failure to identify
possible threat.
If problem persists Contact
Technical Support for
investigation.
Info
65 Sending Scan Request with
req_id zero
Summit spy feature state None
Received RFDC Shutdown notify
message for RFDC session with
ip addr%s
Summit spy feature state None
Received RFDC Shutdown notify
message for RFDC session (id
=%d)
Summit spy feature state.
Explicit shutdown indicates
result of administrative action
(Disable feature/Role, system
shutdown)
None
Received request from CM to
delete RFDC session (id =%d).
Cannot process this request.
Internal operating issue.
Possible configuration
mismatch. Deletion however
should have no impact on
running detection scans.
If problem persists Contact
Technical Support for
investigation.
Received request from CM to
delete RFDC session with ip
addr%s
Summit spy feature state None
Connection with RFDC session
with ip addr%s is up
Summit spy feature state None
Connection with RFDC session
(id =%d) is up
Summit spy feature state None
Table 30: REMOTE_INS (58) logs and events (Continued)
Log
ID
Log Message Comment Action