Specifications

Logs and Events
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
140
Unable to initialize global log
bitmask
Internal operation error. May
indicate a larger problem with
system's memory resource
management.
If problem persists Contact
Technical Support for
investigation.
Major
9 %s
Threat [Known AP with invalid
SSID] detected by AP%s, SN%s
(%s). Details: RSSI:%u,
scanned channel:%u,
channel_rx:%u, bssid:%s,
ssid:%s, privacy:%s,
bssType:%s,
beaconInterval:%dms
Scan Result indication Take appropriate remedial action
to identify and neutralize threat.
Threat [Device in ad-hoc mode]
detected by AP%s, SN%s (%s).
Details: RSSI:%u, scanned
channel:%u, channel_rx:%u,
bssid:%s, ssid:%s, privacy:%s,
bssType:%s,
beaconInterval:%dms
Scan Result indication Take appropriate remedial action
to identify and neutralize threat.
Error in analysis_threads: empty
command arguments. Thread
will exit
Internal operation error. Thread
exist shall cause component to
terminate and be automatically
started by system's health
monitor facility. Situation should
repair itself.
If problem persists Contact
Technical Support for
investigation.
Error in analysis_thread: failed
to create analysis message
queue. Thread will exit
Internal operation error. Thread
exist shall cause component to
terminate and be automatically
started by system's health
monitor facility. Situation should
repair itself.
If problem persists Contact
Technical Support for
investigation.
Error in analysis_thread: failed
to connect to db message
queue. Thread will exit
Internal operation error. Thread
exist shall cause component to
terminate and be automatically
started by system's health
monitor facility. Situation should
repair itself.
If problem persists Contact
Technical Support for
investigation.
Error in
send_ins_delete_rogue_req_msg_
to_db_thread: failed to connect
to db message queue. Cannot
cleanup database.
Internal operation error. Problem
may prevent Rogue AP (Summit
spy) detection from taking
place. Component may need to
be restarted.
If problem persists Contact
Technical Support for
investigation.
Error in setting up RFDC
connection: cannot initialize
pthread attributes. Connection
cannot be setup.
Internal operation error. Problem
may prevent Rogue AP (Summit
spy) detection from taking
place. Component may need to
be restarted.
If problem persists Contact
Technical Support for
investigation.
Error in setting up RFDC
connection: cannot set detached
pthread attributes. Connection
cannot be setup.
Internal operation error. Problem
may prevent Rogue AP (Summit
spy) detection from taking
place. Component may need to
be restarted.
If problem persists Contact
Technical Support for
investigation.
Table 30: REMOTE_INS (58) logs and events (Continued)
Log
ID
Log Message Comment Action