Specifications

HOST_SERVICE_MANAGER (8)
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
125
HOST_SERVICE_MANAGER (8)
40 Invalid NAS port number for
subnet%d. Default value will be
used.
Possible problem with
configuration or availability of
Radius Server or WM-AD
configuration of radius
parameters. Default parameters
will be used. No expected
impact to user authentication.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition. Verify
Reacheability of RadiusServer
utilizing the RadiusTest feature
in GlobalSettings. If problem
persists contact Technical
Support to investigate.
41 Mismatched IP addresses:%s Possible problem with
configuration or availability of
Radius Server or WM-AD
configuration of radius
parameters. Default parameters
will be used. No expected
impact to user authentication.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition. Verify
Reacheability of RadiusServer
utilizing the RadiusTest feature
in GlobalSettings. If problem
persists contact Technical
Support to investigate.
42 WPA2 pre-authentication
failure.%s.
User failed authentication. Validate user credentials
configuration. If problem persist
with proper user configuration
contact Technical Support to
investigate
Info
65 RADIUS server authenticated
login (Access Accepted).
User authentication successful None
66 RADIUS server rejected login
(Access Rejected).
User failed authentication Validate user credentials
configuration. If problem persist
with proper user configuration
contact Technical Support to
investigate.
67 Radius Request: %s Radius Authentication State None
68 Radius Response: %s Radius Authentication State None
69 WPA2 pre-authentication
success. %s.
Radius Authentication State None
Table 21: HOST_SERVICE_MANAGER (8) logs and events
Log
ID
Log Message Comment Action
Critical
1 Failed to set management IP
address ' + newData[1] + '.
Please check your network for
probable conflict. Rolling back
to IP address ' + currentData[1]
+ '.'
Possible network conflict for
system IP address. Configuration
request failed.
Verify network topology and
addressing.
Table 20: RADIUS_CLIENT (7) logs and events (Continued)
Log
ID
Log Message Comment Action