Specifications

EVENT_SERVER (1)
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
109
28 Message has been written to the
log but an error was encountered
when closing the file - Error
no:%d.
Internal Component Failure. Log
system may not be working
properly. Failed to log
configuration change.
If problem persists, contact
Technical Support to investigate.
29 Unable to open AP detection log
file - Error no:%d. Message will
be dropped.
Failure in Rogue AP Detection
Logging. Reporting of rogue
devices may be affected. Only
relevant if Summit spy is
enabled.
If problem persists, contact
Technical Support to investigate.
30 Unable to determine AP
detection log file size - Error
no:%d. Message will be
dropped.
Failure in Rogue AP Detection
Logging. Reporting of rogue
devices may be affected. Only
relevant if Summit spy is
enabled.
If problem persists, contact
Technical Support to investigate.
31 Cannot reset AP detection log
file pointer to beginning of file -
Error no:%d. The message and
subsequent messages will be
dropped.
Failure in Rogue AP Detection
Logging. Reporting of rogue
devices may be affected. Only
relevant if Summit spy is
enabled.
If problem persists, contact
Technical Support to investigate.
32 Cannot set AP detection log file
pointer to specific position in
the log - Error no:%d. The
message and subsequent
messages will be lost.
Failure in Rogue AP Detection
Logging. Reporting of rogue
devices may be affected. Only
relevant if Summit spy is
enabled.
If problem persists, contact
Technical Support to investigate.
Minor
39 Failed to delete old exported file
[%s].
Old Log file has remained in the
system and may affect ability to
export further reports. Contact
Technical Support to investigate
If problem persists, contact
Technical Support to investigate.
40 Cannot export image. There
already are [%d] images
exported.
Too many reports open. Close
some reports and retry.
If problem persists, contact
Technical Support to investigate.
41 Failed to receive message. n/a n/a
42 Incoming message dropped,
because of the rate limiting
mechanism.
n/a n/a
43 Unable to format msg from
index [%d].
Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system.
If problem persists, contact
Technical Support to investigate.
44 Unknown message type [%d]. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system.
If problem persists, contact
Technical Support to investigate.
45 Error reading property [%s]. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system.
If problem persists, contact
Technical Support to investigate.
46 Wrong bitmask size [%d]. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system.
If problem persists, contact
Technical Support to investigate.
Table 15: EVENT_SERVER (1) logs and events (Continued)
Log
ID
Log Message Comment Action