Specifications

DRM - Dynamic Radio Management
Summit WM Series WLAN Switch and Altitude Access Point Software Version 4.1 Technical Reference Guide
102
Figure 21: DRM global settings
This page allows the parameters of DRM to be configured for the entire system. The following settings
are available:
● Enable DRM – controls whether DRM is enabled or disabled for the entire system. This setting
overrides the setting on each individual AP.
● DRM on/off – controls whether DRM is enabled or disabled for a specific AP.
● Coverage – controls the selection of Standard or Shaped coverage mode for each AP.
● Avoid WLAN – controls whether Tx power is backed off in the presence of other WLAN networks
that are NOT part of the Summit WM system (i.e. different SSID).
● Minimum Tx – allows the user to set the absolute minimum Tx level the AP will use.
● Maximum Tx – allows the user to set the absolute maximum Tx level the AP will use.