Installation guide

Chapter 4: Hardware Setup
Summit
®
WM3400 Wireless LAN Controller Installation Guide
22
Summit WM3400 Wireless LAN Controller Console
Port Setup
To add the Summit WM3400 wireless LAN controller to the network and prepare it for initial
configuration:
1 Using the supplied console cable (pictured below), connect the Summit WM3400 wireless LAN
controller console port to an RS-232 (DB-9) serial port on a separate computer (the “configuration
computer”).
The pinout for the supplied console cable (RJ-45 to DB9) is shown in the following table.
2 On the configuration computer, configure a terminal emulation application (such as HyperTerminal)
as follows.
RJ-45 1 2 3 4,5 6 7 8
DB9 8 6 2 5 3 4 7