Installation guide

Rack Mount Installation Instructions (Optional)
Summit
®
WM3400 Wireless LAN Controller Installation Guide
21
1 Connect the USB flash drive to the USB.
2 Wait a few seconds for the drive to be recognized by the controller.
3 Follow the instructions in the Summit® WM3000 Series Controller System Reference Guide or Summit®
WM3000 Series Controller and Altitude™ 4000 Series Access Point CLI Reference Guide for more
information on accessing USB storage devices from the controller for file transfers or firmware
updates.
NOTE
The controller supports USB flash devices formatted with FAT or VFAT (FAT32) filesystems only. If your
flash storage device is formatted with another filesystem you will need to format your device with a supported
filesystem.
Rack Mount Installation Instructions (Optional)
To install the Summit WM3400 wireless LAN controller in a rack:
1 Attach the controller to the 1U rack mount kit (Part Number: 15738) using the guides provided.
2 Place the power supply unit in the rack mount tray in the space provided.
3 Attach the mounting tray to the rack using screws appropriate for your rack’s mounting holes.
Attach to Rack
1U Rack Mount Kit
Back
Switch
Guides
Front
Power Supply Guide
Cable
Management
C
GuidesController
Cable Management
Power Supply Guide