Installation guide

Chapter 4: Hardware Setup
Summit
®
WM3400 Wireless LAN Controller Installation Guide
18
Cabling Information
The Summit WM3400 wireless LAN controller has five RJ-45 Gigabit Ethernet ports, one Gigabit SFP
(fiber) port, one USB port, one Console connector and one ExpressCard slot. The above diagram shows
each of those ports and the cables or devices attached to them. The sections that follow describe
detailed connection and cabling information for each port. For software configuration, please see the
Summit WM3000 Series Controller System Reference Guide available from
http://www.extremenetworks.com/go/
documentation
.
Gigabit Ethernet on the Summit WM3400 Wireless
LAN Controller
The Summit WM3400 wireless LAN controller has five RJ-45 Gigabit Ethernet ports and one 1 combo
Gigabit (RJ45 + SFP) uplink port. Using the RJ-45 ports requires connecting a Category-6 Ethernet cable
to the port. To use the Gigabit SFP port, first install an SFP Module.
NOTE
Ports ge1 - ge5 are PoE+ capable. Five concurrent standard 802.3af compliant POE devices may be
supported at full power. Only up to three POE+ devices at 30 Watt maximum power each are supported through
power sharing.
+