Installation guide

Summit
®
WM3700 Wireless LAN Controller Installation Guide
25
CHAPTER
5
Basic Configuration
Once the Summit WM3700 Wireless LAN Controller hardware is installed and powered on, complete
the following steps to get the device up and running on and access the management functions on the
controller:
1 Connect one end of an Ethernet cable to the management port of the Summit WM3700 Wireless LAN
Controller, and connect the other end to a computer with a working Web browser.
2 Set the computer to use an IP address between 192.168.0.10 and 192.168.0.250 on the connected port.
Set a subnet / network mask of 255.255.255.0.
3 Once the computer has an IP address, point the Web browser to:
https://192.168.0.1/ and the following login screen will display.
4 Enter the default username admin in the Username field.
5 Enter the default password admin123 in the Password field.
6 Click the Login button to load the management interface.
Once the above basic settings have been defined or reviewed, you can set a more sophisticated
controller configuration in respect to your unique deployment requirements. Go to
http://
www.extremenetworks.com/go/documentation
to access the Summit WM3000 Series Controller System Reference
Guide.