Installation guide

Chapter 4: Hardware Setup
Summit
®
WM3700 Wireless LAN Controller Installation Guide
24
● If the POST test fails, the System 1 LED will blink amber. If the POST test succeeds, the System 1
LED will be lit solid green.
● As the software is initialized, the System 2 LED will blink green.
● After the software has finished initializing, the System 1 LED will be lit solid green and the bottom
System 2 LED will be off. The Summit WM3700 wireless LAN controller is ready to be configured, as
described in the Summit WM3000 Series Controller System Reference Guide.
Other LED codes indicate the presence (or absence) of different standby states, or errors. A guide to the
Summit WM3700 wireless LAN controller LEDs codes is provided in Chapter , LED Codes.