Installation guide

Chapter 4: Hardware Setup

Summit

WM3700 Wireless LAN Controller Installation Guide

The Summit WM3700 wireless LAN controller has four RJ-45 Gigabit Ethernet ports, four Gigabit SFP

(fiber) ports, one Out-of-band Fast Ethernet management port and one Console connector. The above

diagram shows each of those ports and the cables or devices attached to them. The sections that follow

describe detailed connection and cabling information for each port. For software configuration, please

see the Summit WM3000 Series Controller System Reference Guide available from the Extreme Networks

website at:

http://www.extremenetworks.com/go/documentation.

NOTE

The management port on the Summit WM3700 wireless LAN controller does not support

MDI/MDI-X

Gigabit Ethernet on the Summit WM3700 wireless

LAN controller

The Summit WM3700 wireless LAN controller has four RJ-45 Gigabit Ethernet ports and four Gigabit

SFP (fiber optic) ports. Using the RJ-45 ports requires connecting a Category-6 Ethernet cable to the

port. To use the Gigabit SFP ports, first install the SFP Modules.

Gigabit Ethernet

RJ45s

Gigabit Ethernet

SFPs