Installation guide

Chapter 3: LED Codes

Summit

WM3700 Wireless LAN Controller Installation Guide

NOTE

During controller start up, the Temperature status LED will be lit Solid Amber. This is normal behavior and

does not indicate an error. At the completion of start up the Temperature Status LED will switch to Solid Green.

Controller Status (Primary System)

Controller Status (Redundant System)

Fan LED

System Status 1 LED System Status 2 LED Event

Off Off Power off

Green Solid Off No Redundancy Feature Enabled

Green Solid Green Solid Redundancy Feature Enabled

Actively Adopting Access Points

Green Solid Amber Blinking No License to adopt Access Points or No

Country Code configured on the controller.

System Status 1 LED System Status 2 LED Event

Off Off Power off

Green Solid Off No Redundancy Feature Enabled

Green Blinking Green Solid Redundant System failed over and

adopting ports

Green Blinking Alternating Green

Blinking & Amber

Blinking

Redundant System not failed over.

Green Solid Amber Blinking No License to adopt Access Points or No

Country Code configured on the controller.

Fan LED Event

Off System Off / POST Start

Green Blinking POST in Process

Green Solid All System Fans Normal Operation

Amber Solid Redundant Cooling Failure

System Operational

Amber Blinking System Cooling Failure

System will be held in reset until the issue

is resolved