Specifications

CLI Reference
Altitude 35x0 Access Point Product Reference Guide66
admin(network.wan.nat)> set
Sets NAT inbound and outbound parameters.
Syntax
Example
admin(network.wan.nat)>set type 2 1-to-many
admin(network.wan.nat)>set ip 2 10.1.1.1
admin(network.wan.nat)>show 2
WAN IP Mode : enable
WAN IP Address : 157.235.91.2
NAT Type : 1-to-many
Inbound Mappings : Port Forwarding
unspecified port forwarding mode : enable
unspecified port fwd. ip address : 111.223.222.1
one to many nat mapping
-------------------------------------------------------------------------------
LAN No. WAN IP
-------------------------------------------------------------------------------
1 157.235.91.2
2 10.1.1.1
set <type> <ip> <inb> <outb>
Sets the type of NAT translation for WAN address index <idx> (1-8) to <type> (none, 1-to-1, or 1-to-many).
Sets the NAT IP mapping associated with WAN address <idx> to the specified IP address <ip>. Sets the
inbound IP address for specified index <index> <ip address>. Sets the inbound mode for specified index
<index> <enable/disable>. Sets the outbound IP address for specified index <index> <ip address>. Sets the
outbound NAT destination <LAN1 or LAN2> <WAN ip 1-8 or None>.