Specifications

Altitude 35x0 Access Point Product Reference Guide 63
admin(network.wan)> set
Defines the configuration of the access point WAN port.
Syntax
Example
admin(network.wan)>
admin(network.wan)>set dhcp disable
admin(network.wan)>set ipadr 157.169.22.5
admin(network.wan)>set dgw 157.169.22.1
admin(network.wan)>set dns 1 157.169.22.2
admin(network.wan)>set auto-negotiation disable
admin(network.wan)>set speed 10M
admin(network.wan)>set duplex half
admin(network.wan)>set mask 255.255.255.000
admin(network.wan)>set pppoe mode enable
admin(network.wan)>set pppoe type chap
admin(network.wan)>set pppoe user jk
admin(network.wan)>set pppoe passwd @#$goodpassword%$#
admin(network.wan)>set pppoe ka enable
admin(network.wan)>set pppoe idle 600
set wan enable/disable Enables or disables the access point WAN port.
dhcp enable/disable Enables or disables WAN DHCP Client mode.
ipadr <idx> <a.b.c.d> Sets up to 8 (using <indx> from 1 to 8) IP addresses
<a.b.c.d> for the access point WAN interface.
mask <a.b.c.d> Sets the subnet mask for the access point WAN
interface.
dgw <a.b.c.d> Sets the default gateway IP address to <a.b.c.d>.
dns <idx> <a.b.c.d> Sets the IP address of one or two DNS servers, where
<indx> indicates either the primary (1) or secondary
(2) server, and <a.b.c.d> is the IP address of the
server.
auto-
negotiation
enable/disable Enables or disables auto-negotiation for the access
point WAN port.
speed <mbps> Defines the access point WAN port speed as either
10 Mbps or 100 Mbps.
duplex <mode> Defines the access point WAN port duplex as either
half or full.
pppoe mode enable/disable Enables or disables PPPoE.
user <name> Sets PPPoE user name.
passwd <password> Defines the PPPoE password.
ka enable/disable Enables or disables PPPoE keepalive.
idle <time> Sets PPPoE idle time.
type <auth-type> Sets PPPoE authentication type.