Specifications

Altitude 35x0 Access Point Product Reference Guide 265
admin(system.fw-update)> update
Executes the access point firmware update over the WAN or LAN port using either ftp or tftp.
Syntax
NOTE
The access point must complete the reboot process to successfully update the device firmware, regardless of
whether the reboot is conducted uing the GUI or CLI interfaces.
admin(system.fw-update)>update ftp
update <mode> Defines the ftp ot tftp mode used to conduct the firmware update. Specifies whether
the update is executed over the access point’s WAN, LAN1 or LAN2 interface <iface>.