Specifications

Altitude 35x0 Access Point Product Reference Guide 199

admin(system.snmp.access)> add

Adds SNMP access entries for specific v1v2 and v3 user definitions.

Syntax

add acl <ip1> <ip2> Adds an entry to the SNMP access control list with <ip1> as the starting IP

address and <ip2> and as the ending IP address.

v1v2c <comm> <access> <oid>

: comm - community string 1 to 31 characters

: access - read/write access - (ro,rw)

: oid - string 1 to 127 chars - E.g. 1.3.6.1

v3 <user> <access> <oid> <sec>

: user - username 1 to 31 characters

: access - read/write access - (ro,rw)

: oid - string 1 to 127 chars - E.g. 1.3.6.1

: sec - security - (none,auth,auth/priv)

: auth - algorithm - (md5,sha1)

(required only if sec is - auth,auth/priv)

: pass1 - auth password - 8 to 31 chars

(required only if sec is 'auth,auth/priv')

: priv - algorithm - (des, aes)

(required only if sec is 'auth/priv')

: pass2 - privacy password - 8 to 31 chars

: (required only if sec is 'auth/priv')

The following parameters must be specified if <sec> is not

none

Authentication type <auth> set to

md5

sha1

Authentication password <pass1> (8 to 31 chars)

The following parameters must be specified if <sec> is set to

auth/priv

Privacy algorithm set to

des

aes

Privacy password <pass2> (8 to 31 chars)