Specifications

Altitude 35x0 Access Point Product Reference Guide 181
admin(system.access)> set
Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout
values.
Syntax
set applet Defines the applet HTTP/HTTPS access parameters.
app-timeout <minutes> Sets the applet timeout. Default is 300 Mins.
cli Defines CLI Telnet access parameters. Enables/disables access from lan
and wan.
ssh Sets the CLI SSH access parameters.
trusted-host <mode>,
<range> <clear>
Enables/Disables global management access (snmp, http, https, telnet and
ssh) for up to 8 addresses (hosts).
auth-timout <seconds> Disables the radio interface if no data activity is detected after the interval
defined. Default is 120 seconds.
inactive-timeout <minutes> Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
snmp Sets SNMP access parameters.
admin-auth Designates a Radius server is used in the authentication verification.
server <ip> Specifies the IP address the Remote Dial-In User Service (RADIUS) server.
port <port#> Specifies the port on which the RADIUS server is listening. Default is
1812.
secret <pw> Defines the shared secret password for RADIUS server authentication.
mode <mode> Enables/disables the access point message mode.
msg Defines the access point login message text.