Specifications

Altitude 35x0 Access Point Product Reference Guide 177
admin(system.aap-setup)> show
Displays the access point’s configuration once adopted by the controller.
Syntax
Example
admin(system.aap-setup)>show
Auto Discovery Mode : disable
controller Interface : lan1
controller Name : greg
Static IP Port : 24576
Static IP Address :
IP Address 1 : 0.0.0.0
IP Address 2 : 0.0.0.0
IP Address 3 : 0.0.0.0
IP Address 4 : 0.0.0.0
IP Address 5 : 0.0.0.0
IP Address 6 : 0.0.0.0
IP Address 7 : 0.0.0.0
IP Address 8 : 0.0.0.0
IP Address 9 : 0.0.0.0
IP Address 10 : 0.0.0.0
IP Address 11 : 0.0.0.0
IP Address 12 : 0.0.0.0
Tunnel to controller : disable
AC Keepalive : 5
Current Controller : 157.235.22.11
AP Adoption State : TBD
admin(system.aap-setup)>
NOTE
The access point CLI is only the only AP interface that displays the AP’s adoption status and AP run state.
show Displays the access point’s adopted configuration.