Specifications

CLI Reference
Altitude 35x0 Access Point Product Reference Guide154
admin(network.wireless.reliable-multicast)> set
Sets the different Reliable Multicast configuration settings.
Syntax :
Example
admin(network.wireless.reliable-multicast)>set mode enable
admin(network.wireless.reliable-multicast)>set stream-limit 10
admin(network.wireless.reliable-multicast)>set query-interval 55
admin(network.wireless.reliable-multicast)>set query-version IGMPv2
admin(network.wireless.reliable-multicast)>set standalone-mode disable
admin(network.wireless.reliable-multicast)>set wlan Reliable_Multicast
admin(network.wireless.reliable-multicast)>set tx-multicast disable
admin(network.wireless.reliable-multicast)>show config
Reliable Multicast mode : enable
Action on original M/C packet : Drop
Reliable Multicast WLAN : Reliable_Multicast
Max Streams to be serviced : 10
Standalone mode : disable
IGMP Query interval : 55
IGMP Query version : IGMPv2
Reliable Multicast Groups :
admin(network.wireless.reliable-multicast)>
set mode <mode> Enables or disables the Reliable Multicast feature.
stream-limit <count> Sets the number of Multicast streams supported by Reliable Multicast.
Enter a value in the range
1 and 32 . The default value is 12 .
query-interval <seconds> Sets the IGMP query interval in seconds. Enter a value in the range
30
and
300 .
query-version <version> Sets the IGMP version to use. Use
IGMPv1 or IGMPv2 or IGMPv3 .
standalone-mode <mode> Enables or disable stand alone mode for Reliable Multicast. In this mode,
the AP assumes the role of a IGMP querier in the absence of an IGMP
router in the network.
wlan <idx> Enables the WLAN with the ESS ID <idx> for Reliable Multicast.
tx-multicast <mode> Enables the re-transmission of the received Multicast packet. If disabled,
the received multicast packet is dropped after converting it to a unicast
packet.