Specifications

Altitude 35x0 Access Point Product Reference Guide 137
admin(network.wireless.rogue-ap)> set
Defines the access point ACL rogue AP method.
Syntax
Example
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)>set mu-scan enable
admin(network.wireless.rogue-ap)>set interval 10
admin(network.wireless.rogue-ap)>set on-channel disable
admin(network.wireless.rogue-ap)>set detector-scan disable
admin(network.wireless.rogue-ap)>set ABG-scan disable
admin(network.wireless.rogue-ap)>set extreme networks-ap enable
admin(network.wireless.rogue-ap)>set applst-ageout 10
admin(network.wireless.rogue-ap)>set roglst-ageout 10
admin(network.wireless.rogue-ap)>show
MU Scan : enable
MU Scan Interval : 10 minutes
On Channel : disable
Detector Radio Scan : disable
Auto Authorize Extreme Networks APs : enable
Approved AP age out : 10 minutes
Rogue AP age out : 10 minutes
set mu-scan <mode> Enables or disables to permit Clients to scan for rogue APs.
interval <minutes> Define an interval for associated Clients to beacon in attempting to locate
rogue APs. Value not available unless mu-scan is enabled.
on-channel <mode> Enables or disables on-channel detection.
detector-scan <mode> Enables or disables AP detector scan (dual-radio model only).
ABG-scan <mode> Enables or disables A/BG Detector Scan Mode.
extreme
networks-ap
<mode> Enables or disables the Authorize Any AP with a Extreme Networks MAC
address option.
applst-ageout <minutes> Sets the approved AP age out time.
roglst-ageout <minutes> Sets the rogue AP age out time.