Specifications

CLI Reference
Altitude 35x0 Access Point Product Reference Guide116
admin(network.wireless.radio.radio1)> show
Displays specific 802.11b/g radio settings.
Syntax
Example
admin(network.wireless.radio.radio1)>show radio
Radio Setting Information
Placement : indoor
MAC Address : 00A0F8715920
Radio Type : 802.11b/g
ERP Protection : Off
Channel Setting : user selection
ACS Exception Channel List :
Antenna Diversity : full
Power Level : 5 dbm (4 mW)
802.11b/g mode : B-Only
Basic Rates : 1 2 5.5 11
Supported Rates : 1 2 5.5 11
Beacon Interval : 100 K-usec
DTIM Interval per BSSID
1 : 10 beacon intvls
2 : 10 beacon intvls
3 : 10 beacon intvls
4 : 10 beacon intvls
short preamble : disable
RTS Threshold : 2341 bytes
Extended Range : 0 miles
QBSS Channel Util Beacon Intervl : 10 beacon intvls
QBSS Load Element Mode : enable
admin(network.wireless.radio.radio1)>show qos
Radio QOS Parameter Set 11g-default
-----------------------------------------------------------------------------
Access Category CWMin CWMax AIFSN TXOPs (32 usec) TXOPs ms
-----------------------------------------------------------------------------
Background 15 1023 7 0 0.000
Best Effort 15 63 3 31 0.992
Video 7 15 1 94 3.008
Voice 3 7 1 47 1.504
CAUTION
If you do NOT include the index number (for example, "set dtim 50"), the DTIMs for all four BSSIDs will be
changed to 50. To change individual DTIMs for BSSIDs, specify the BSS Index number (for example, "set dtim 2
50). This will change the DTIM for BSSID 2 to 50.
show radio Displays specific 802.11b/g radio settings.
qos Displays specific 802.11b/g radio WMM QoS settings.