Installation guide

Altitude 3510 Access Point Installation Guide 13
Powering the Access Point
The AP3510 can receive power in one of three ways:
● Power over Ethernet (PoE) - If your network is already set up with PoE (802.3af
compliant), attach the LAN Ethernet cable to the AP3510’s LAN port.
● Power over Ethernet: Adding PoE injector - If your network is not set up with PoE,
you can provide power to the Ethernet cable with a PoE injector. The PoE injector
must be 802.3af compliant. The PoE injector is not provided with the AP3510.
● Power by AC adaptor - Extreme Network's 48V AC-DC power supply (Part No.
15728) can be used to power the AP3510. It is not included in the kit and is
orderable separately as an accessory.