Installation guide

Altitude 3510 Access Point Installation Guide 11
3 Hardware Installation
An AP3510 installation includes mounting the AP3510 on a table-top, wall, ceiling T-bar
or above the ceiling orientation, connecting the AP3510 to the network (LAN or WAN
port connection), connecting antennas and applying power. Installation procedures vary
for different environments.
Precautions
Before installing the AP3510 verify the following:
● Do not install in wet or dusty areas without additional protection. Contact an
Extreme Networks representative for more information.
● Verify the environment has a continuous temperature range between -20° C to 50° C.
Package Contents
Check package contents for the correct model AP3510 depending on your country of
application and applicable AP3510 accessories. Each available configuration (at a
minimum), contains:
● AP3510 Dual 802.11a+g radio, external antenna. The part number is dependent on
the regulatory domain:
● Altitude 3510 Access Point Installation Guide
● Accessories Bag (4 rubber feet for desk mounting and an LED light pipe and badge
with label for above the ceiling installations)
Verify the model indicated on the bottom of the AP3510 is correct. Contact the Extreme
Networks Support Center to report missing or improperly functioning items.
Part Number Model Number Regulatory Domain
15720 AP3510-US For use in the US only
15721 AP3510-ROW For use in Europe & Rest of World (RoW)
15723 AP3510-IL For use in Israel only