Specifications

Altitude 3500 Series Access Point Product Reference Guide
97
To configure specific SNMP RF Traps on the AP35xx:
1 Select System Configuration > SNMP Access > SNMP RF Trap Thresholds from the menu tree.
2 Configure the RF Trap Thresholds field to define device threshold values for SNMP traps.
NOTE
Average Bit Speed, % of Non-Unicast, Average Signal, Average Retries, % Dropped and %
Undecryptable are not access point statistics.
Pkts/s Enter a maximum threshold for the total throughput in Pps
(Packets per second).
Throughput Set a maximum threshold for the total throughput in Mbps
(Megabits per second).
Average Bit Speed Enter a minimum threshold for the average bit speed in
Mbps (Megabits per second).
Average Signal Enter a minimum threshold for the average signal strength
in dBm for each device.
Average Retries Set a maximum threshold for the average number of
retries for each device.
% Dropped Enter a maximum threshold for the total percentage of
packets dropped for each device. Dropped packets can be
caused by poor RF signal or interference on the channel.