Specifications

System Configuration

Altitude 3500 Series Access Point Product Reference Guide

4 Specify the users who can read and optionally modify the SNMP-capable client.

5 If configuring SNMP v3 user definitions, set the SNMP v3 engine ID.

6 Click Apply to save any changes to the SNMP Access screen. Navigating away from the screen

without clicking the Apply button results in all changes to the screen being lost.

7 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings

displayed on the SNMP Access screen to the last saved configuration.

8 Click Logout to securely exit the AP35xx Access Point applet. A prompt displays confirming the

logout before the applet is closed.

For additional SNMP configuration information, see:

● Configuring SNMP Access Control on page 90

● Enabling SNMP Traps on page 92

● Configuring Specific SNMP Traps on page 94

● Configuring SNMP RF Trap Thresholds on page 96

Configuring SNMP Access Control

Use the SNMP Access Control screen (as launched from the SNMP Access screen) to specify which users

can read SNMP generated information and, if capable, modify related settings from an SNMP-capable

client.

Use the SNMP Access Control screen's Access Control List (ACL) to limit, by Internet Protocol (IP)

address, who can access the AP35xx SNMP interface.

NOTE

The ACL applies to both SNMP v3 user definitions and SNMP v1/v2c community definitions on the AP35xx

SNMP Access screen.

SNMP Access

Control

Click the SNMP Access Control button to display the

SNMP Access Control screen for specifying which users

can read SNMP-generated information and potentially

modify related settings from an SNMP-capable client.

The SNMP Access Control screen's Access Control List

(ACL) uses Internet Protocol (IP) addresses to restrict

access to the AP’s SNMP interface. The ACL applies to

both SNMP v3 user definitions and SNMP v1/v2c

community definitions.

For detailed instructions of configuring SNMP user access

and modification privileges, see “Configuring SNMP

Access Control” on page 90.

AP35xx SNMP v3

Engine ID

The AP35xx SNMP v3 Engine ID field lists the unique

SNMP v3 Engine ID for the AP35xx. This ID is used in

SNMP v3 as the source for a trap, response or report. It is

also used as the destination ID when sending get, getnext,

getbulk, set or inform commands.