Specifications

Adaptive AP
Altitude 3500 Series Access Point Product Reference Guide
562
Sample Controller Configuration File for IPSec and Independent
WLAN
The following constitutes a sample Summit WM3700 controller configuration file supporting an AAP
IPSec with Independent WLAN configuration. Please note new AAP specific CLI commands in red and
relevant comments in blue.
The sample output is as follows:
!
! configuration of WM3700 WM3700-1
!
version 1.0
!
!
aaa authentication login default none
service prompt crash-info
!
hostname WM3700-1
!
username admin password 1 8e67bb26b358e2ed20fe552ed6fb832f397a507d
username admin privilege superuser
username operator password 1 fe96dd39756ac41b74283a9292652d366d73931f
!
!
To configure the ACL to be used in the CRYPTO MAP
!
ip access-list extended AAP-ACL permit ip host 10.10.10.250 any rule-precedence 20
!
spanning-tree mst cisco-interoperability enable
spanning-tree mst config
name My Name
!
country-code us
logging buffered 4
logging console 7
logging host 157.235.92.97
logging syslog 7
snmp-server sysname WM3700-1
snmp-server manager v2
snmp-server manager v3
snmp-server user snmptrap v3 encrypted auth md5 0x7be2cb56f6060226f15974c936e2739b
snmp-server user snmpmanager v3 encrypted auth md5 0x7be2cb56f6060226f15974c936e2739b
snmp-server user snmpoperator v3 encrypted auth md5 0x49c451c7c6893ffcede0491bbd0a12c4
!
To configure the passkey for a Remote VPN Peer - 255.255.255.255 denotes all AAPs.
12345678 is the default passkey. If you change on the AAP, change here as well.
!
crypto isakmp key 0 12345678 address 255.255.255.255
!
ip http server
ip http secure-trustpoint default-trustpoint
ip http secure-server
ip ssh
no service pm sys-restart
timezone America/Los_Angeles