Specifications

Altitude 3500 Series Access Point Product Reference Guide
525
1 Select Network Configuration > Wireless > Radio Configuration from the Altitude 35xx menu tree.
2 Enable the radio(s) using the Enable checkbox(es) for both Radio 1 and Radio 2.
Refer to RF Band of Operation parameter to ensure you are enabling the correct 802.11a or 802.11b/g
radio. After the settings are applied within this Radio Configuration screen, the Radio Status and
MUs connected values update. If this is an existing radio within a mesh network, these values update
in real-time.
CAUTION
If a radio is disabled, be careful not to accidentally configure a new WLAN, expecting the radio to be
operating when you have forgotten it was disabled.
3 Select the Base Bridge checkbox to allow the access point radio to accept client bridge connections
from other access points in client bridge mode. The base bridge is the acceptor of mesh network data
from those client bridges within the mesh network and never the initiator.
CAUTION
A problem could arise if a Base Bridge’s Indoor channel is not available on an Outdoor Client Bridge's
list of available channels. As long as an Outdoor Client Bridge has the Indoor Base Bridge channel in its
available list of channels, it can associate to the Base Bridge.