Specifications

Altitude 3500 Series Access Point Product Reference Guide
501
AP35xx>admin(stats)> send-cfg-ap
Copies the AP35xx’s configuration to another AP35xx within the known AP table.
Syntax
Example
admin(stats)>send-cfg-ap 2
admin(stats)>
NOTE
The send-cfg-ap command copies all existing configuration parameters except Mesh settings, LAN IP data,
WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI), see
“Viewing Known Access Point Statistics” on page 254.
send-cfg-ap <idx> Copies the AP35xx’s configuration to the AP35xxs within the known AP table.
Mesh configuration attributes do not get copied using this command and must
be configured manually.