Specifications

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
498
AP35xx>admin(system.fw-update)>update
Executes the AP35xx firmware update over the WAN or LAN port using either ftp or tftp.
Syntax
NOTE
The access point must complete the reboot process to successfully update the device firmware, regardless
of whether the reboot is conducted using the GUI or CLI interfaces.
admin(system.fw-update)>update ftp
For information on updating access point device firmware using the applet (GUI), see “Updating Device
Firmware” on page 107.
update <mode> Defines the ftp or tftp mode used to conduct the firmware update. Specifies whether
the update is executed over the AP35xx’s WAN, LAN1 or LAN2 interface <iface>.