Specifications

Altitude 3500 Series Access Point Product Reference Guide
497
AP35xx>admin(system.fw-update)>set
Defines AP35xx firmware update settings and user permissions.
Syntax
admin(system.fw-update)>set fw-auto enable
admin(system.fw-update)>set cfg-auto enable
admin(system.fw-update)>set file 2.0.0.0-29D
admin(system.fw-update)>set path c:/fw
admin(system.fw-update)>set server 157.235.111.22
admin(system.fw-update)>set user mudskipper
admin(system.fw-update)>set passwd muddy
For information on updating access point device firmware using the applet (GUI), see “Updating Device
Firmware” on page 107.
set fw-auto <mode> When enabled, updates device firmware each time the firmware versions
are found to be different between the AP35xx and the specified firmware
on the remote system.
cfg-auto <mode> When enabled, updates device configuration file each time the config file
versions are found to be different between the AP35xx and the specified
LAN or WAN interface.
file <name> Defines the firmware file name (1 to 39 characters).
path <path> Specifies a path for the file (1 to 39 characters).
server <ip> The IP address for the FTP/TFTP server used for the firmware and/or
config file update.
user <name> Specifies a username for FTP server login (1 to 39 characters).
passwd <password> Specifies a password for FTP server login (1 to 39 characters). Default is
motorola.