Specifications

Altitude 3500 Series Access Point Product Reference Guide
495
Firmware Update Commands
AP35xx>admin(system)>fw-update
Displays the firmware update submenu. The items available under this command are shown below.
NOTE
The access point must complete the reboot process to successfully update the device firmware, regardless
of whether the reboot is conducted using the GUI or CLI interfaces.
show Displays the current AP35xx firmware update settings.
set Defines the AP35xx firmware update parameters.
update Executes the firmware update.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the AP35xx system flash.
quit Quits the CLI and exits the current session.